Analysis of Placement and Rating Selection of Lightning Arresters for 20 kV Distribution Networks - A Case Study

  • Arlenny Arlenny Electrical Engineering Study Program, Faculty of Engineering, Lancang Kuning University, Pekanbaru, Indonesia
  • Aj Pandapotan Silalahi Electrical Engineering Study Program Alumnus, Faculty of Engineering, Lancang Kuning University Pekanbaru, Indonesia
  • Masnur Putra Halilintar Electrical Engineering Study Program, Faculty of Engineering, Lancang Kuning University, Pekanbaru, Indonesia
  • Mahmud Akhyar Mecatronic Engineering Study Program, Faculty of Engineering, Lancang Kuning University, Pekanbaru, Indonesia
DOI: http://dx.doi.org/10.36842/jomase.v70i2.634
Abstract views: 0 ,   pdf downloads: 0
 

Abstract

Disturbances caused by lightning strikes in the electric power system may occur in the transmission and distribution area. This paper aim is to analysis of placement and rating selection of lightning arresters for 20 kV distribution networks. A case study was conducted in the network assets of PT. PLN (Persero) at the Maroko feeder, Rayon Duri, Indonesia. This study method employed a quantitative analytical approach to evaluate the optimal placement and rating selection of 5 kA and 10 kA distribution-class lightning arresters within the 20 kV network of PT. PLN (Persero) Rayon Duri. The results of placement and arrester rating for the Maroko feeder revealed the voltage rating specification of 19.2 kV and a current of 10 kA. It was expected that the arrester can minimize lightning strike disturbances that cause induction. The results obtained after conducting simulations, the arrester can reduce a fairly large voltage quickly with a distance of 5.6334 meters from the disturbance and the duration of 1.2 - 50 ?s. Therefore, placing the arrester in close proximity to the equipment significantly improves insulation coordination by accelerating the suppression and safe discharge of lightning-induced surges.

##Keywords:## : Lightning Arrester Rating, Maroko Feeder, ATP Draw.

Downloads

Download data is not yet available.
Published
Jul 30, 2026
How to Cite
ARLENNY, Arlenny et al. Analysis of Placement and Rating Selection of Lightning Arresters for 20 kV Distribution Networks - A Case Study. Journal of Ocean, Mechanical and Aerospace -science and engineering-, [S.l.], v. 70, n. 2, p. 140-147, july 2026. ISSN 2527-6085. Available at: <https://isomase.org/Journals/index.php/jomase/article/view/634>. Date accessed: 05 aug. 2026. doi: http://dx.doi.org/10.36842/jomase.v70i2.634.

References

[1] Cao, J., Du, Y., Ding, Y., Qi, R., Li, B., Chen, M. & Li, Z. (2021). Comprehensive assessment of lightning protection schemes for 10 kV overhead distribution lines. IEEE Transactions on Power Delivery, 37(3), 2326-2336.
[2] Tsutsu, S., Mendu, B., Monchusi, B. B. & Mbuyu, S. (2025, October). Surge Arrester Failure Prediction and Protection in Power Systems: A Review of Simulation, Diagnostics, and Machine Learning Approaches. In 2025 5th International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) (pp. 1-12). IEEE.
[3] Gholami, A., Khodsuz, M. & Mashayekhi, V. (2025). The Lightning Protection Assessment of Distribution Lines with Considering Frequency Grounding System. Iranian Journal of Electrical & Electronic Engineering, 21(1).
[4] Guddanti, K. P., Bharati, A. K., Nekkalapu, S., Mcwherter, J. & Morris, S. L. (2025). A comprehensive review: Impacts of extreme temperatures due to climate change on power grid infrastructure and operation. IEEE Access, 13, 49375-49415.
[5] Shariatinasab, R., Safar, J. G. & Falaghi, H. (2014). Optimisation of arrester location in risk assessment in distribution network. IET Generation, Transmission & Distribution, 8(1), 151.
[6] Paul, D., Sutherland, P. E., Mardegan, C. S. & Lewin, P. (2025). Update on transient surge arresters (SA) and insulators at medium-voltage power distribution system. IEEE Transactions on Industry Applications, 61(4), 5962-5970.
[7] Neto, E. W., Martinez, M. L. B., Diniz, A. M. M., Dos Santos, G. J. G. & Campos, B. N. (2012, September). 10 kA distribution arresters: The adequate choice for medium voltage networks. In 2012 International Conference on Lightning Protection (ICLP) (pp. 1-5). IEEE.
[8] Arlenny, A., Pratiwi, D. & Situmeang, U. (2025). Analysis of Electrical System Reliability for Premium Customer after Installation of Automatic Change Over Switch (ACOS) - A Case Study. Journal Of Ocean, Mechanical And Aerospace -Science And Engineering-, 69(1), 65-74. doi:10.36842/jomase.v69i1.531.
[9] STOKES, E. I. G. (2003). Handbook of electrical installation practice. Doi:10.1002/9780470774526.
[10] Cao, J., Du, Y., Ding, Y., Qi, R., Chen, M., Li, Z., ... & Andreotti, A. (2022). Lightning protection with a differentiated configuration of arresters in a distribution network. IEEE Transactions on Power Delivery, 38(1), 409-419.
[11] Shariatinasab, R., Safar, J. G. & Falaghi, H. (2014). Optimisation of arrester location in risk assessment in distribution network. IET Generation, Transmission & Distribution, 8(1), 151.
[12] Ravichandran, N., Proto, D. & Andreotti, A. (2024). Surge arrester optimal placement in distribution networks: A decision theory-based approach. Electric Power Systems Research, 234, 110744.
[13] Kamarposhti, M. A. & Hejri, A. (2021). Optimal location of surge arresters in distribution network considering reliability and technical and economic factors to reduce costs using ICA algorithm. International Journal of Smart Electrical Engineering, 10(1), 7-16.
[14] Naik, C., Brotherton, C., Bates, C. & Senkowicz, E. (2025, April). Practical Considerations for Appropriate Arrester Selection. In 2025 IEEE Rural Electric Power Conference (REPC) (pp. 79-85). IEEE.
[15] Asadi, A. H. K., Eskandari, M. & Delavari, H. (2024). Accurate surge arrester modeling for optimal risk-aware lightning protection utilizing a hybrid Monte Carlo–particle swarm optimization algorithm. Technologies, 12(6), 88.
[16] PT PLN (Persero). (2013). SPLN T5.006: Pedoman Pemilihan Arrester Pada Jaringan Distribusi 20 kV. PT PLN (Persero).
[17] Institute of Electrical and Electronics Engineers. (1991). IEEE Std 142-1991: IEEE Recommended Practice For Grounding of Industrial and Commercial Power Systems. IEEE.
[18] PT PLN (Persero). (1981). SPLN 41-7: Aluminium Conductor Steel Reinforced (A3CSR). PT PLN (Persero).
[19] PT PLN (Persero). (2013). SPLN D5.012: Pedoman Pembumian Gardu Induk Dan Jaringan Transmisi. PT PLN (Persero).
[20] Widianto. (2016). Analisis Sistem Proteksi Surja Petir Saluran Udara Tegangan Menengah pada Penyulang KBL P9 (Undergraduate thesis). Universitas Muhammadiyah Purwokerto.