Planning and Design of Corrosion Rate Equipment

  • Doni Saputra Mechanical Engineering, Universitas Riau, Indonesia
  • M. Dalil Mechanical Engineering, Universitas Riau, Indonesia
DOI: http://dx.doi.org/10.36842/jomase.v33i1.407

Abstract

Corrosion is natural process that occurred in metal structure. In the planning of construction, metal is the important part of construction. Yet it is often, corrosion phenomenon occurred due to interface with corrosive environment. In the design process, it is need to consider the metal behavior on how much the corrosion rate occurred for a certain time in order to confirm the metal structure application. This equipment is built to support the knowledge of corrosion rate for metal. The experiment shows the result of three specimens regarding the corrosion rates. The corrosive condition is created to trigger the corrosion process where the comparison corrosion rate between sub-soil water and peat water contribute to significance impact of corrosion process.

##Keywords:## Corrosion, Rate, Water.
Published
Jul 30, 2016
How to Cite
SAPUTRA, Doni; DALIL, M.. Planning and Design of Corrosion Rate Equipment. Journal of Ocean, Mechanical and Aerospace -science and engineering-, [S.l.], v. 33, n. 1, p. 9 - 12, july 2016. ISSN 2527-6085. Available at: <https://isomase.org/Journals/index.php/jomase/article/view/407>. Date accessed: 30 apr. 2026. doi: http://dx.doi.org/10.36842/jomase.v33i1.407.
Citation Formats
Issue
Vol 33 No 1 (2016): Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse)
Section
Articles

References

1. Collins, (1994), Failure Of Materials In Mechanical Design, Second Edition. John Wiley & Sons.
2. Pierre R. Roberge, (2000), Handbook of Corrosion Engineering, McGraw-Hill.
3. Pierre R. Roberge, (2007), Corrosion Inspection and Monitoring, John Wiley & Sons.
4. Robert Baboian, (2005), Corrosion Test and Standard, Second Edition, ASTM International, Editor. 5.Sularso, Haruo Tohar, (2000), Pompa dan Kompresor, PT Pradaya, Jakarta 2000.
6. Osamu Ikeda, Yoshio Watanabe, and Fuminari Itoh,(2007), Corrosion Measurement of a Conductive Paste and Anisotropic Conductive Adhesive Films, IEEE Polytronic 2007 Conference.