Design Shape and Dimension of Threshing Station Model Palm Oil Mill in PT. Perkebunan Nusantara V - PKS Sei Galuh Using Autodesk AutoCAD 2014 Software

  • Dodi Sofyan Arief Mechanical Engineering, Universitas Riau, Indonesia
  • Galuh Leonardo Sihombing Mechanical Engineering, Universitas Riau, Indonesia
  • Amir Hamzah Electrical Engineering, Universitas Riau, Indonesia
  • Andri PT. Perkebunan Nusantara V – PKS Sei Galuh, Riau, Indonesia
DOI: http://dx.doi.org/10.36842/jomase.v39i1.390

Abstract

Palm oil mills in PT. Perkebunan Nusantara V PKS - Sei Galuh is a producer of crude palm oil CPO (Crude Palm Oil), which consists of several stations the processing of palm oil, one of which is the threshing station. Threshing station is the station there is a separation palm kernel process with the cluster in a way slammed into a rotating drum. The purpose of this research is to design the shape and dimension of the station threshing model palm oil mill in PT. Perkebunan Nusantara V - PKS Sei Galuh with scale of 1: 8 using Autodesk Autocad 2014 Software. Design of shapes and dimension threshing station model is divided into three groups, namely the design shape and dimension of auto feeder, design shape and dimension of thresher and design shape and dimension of screw conveyor. The design shape and dimension of auto feeder are 2 units sprocket and 11 plate shaped profile L. The design shape and dimension of thresher is a diameter of 230 mm and a length 500 mm. The design shapes and dimension of screw conveyor are 3 screw with a diameter of 100 mm and a length of each screw is 156 mm, 160 mm and 156 mm. Cover on the design of the shape and dimension of screw conveyor U-shaped profile with a diameter of 120 mm and a length of 620 mm cover.

##Keywords:## Threshing Station Model, Screw Conveyor, Thresher, Auto Feeder, Autodesk Autocad 2014 Software.
Published
Jan 30, 2017
How to Cite
SOFYAN ARIEF, Dodi et al. Design Shape and Dimension of Threshing Station Model Palm Oil Mill in PT. Perkebunan Nusantara V - PKS Sei Galuh Using Autodesk AutoCAD 2014 Software. Journal of Ocean, Mechanical and Aerospace -science and engineering-, [S.l.], v. 39, n. 1, p. 1 - 6, jan. 2017. ISSN 2527-6085. Available at: <https://isomase.org/Journals/index.php/jomase/article/view/390>. Date accessed: 22 apr. 2026. doi: http://dx.doi.org/10.36842/jomase.v39i1.390.
Citation Formats
Issue
Vol 39 No 1 (2017): Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse)
Section
Articles

References

1. Naibaho, Ponten M. 1996. Teknologi Pengolahan Kelapa Sawit. Edisi Pertama. Medan. Pusat Penelitian Kelapa Sawit.
2. Badogil, H. T. 2016. Perencanaan Proses Produksi dan Pembuatan Model Stasiun Penebahan di PT. Perkebunan Nusantara V – PKS Sei Galuh. Skripsi. Jurusan Teknik Mesin, Fakultas Teknik, Universitas Riau.
3. Sihombing, G. L. Arief, D. S, Hamzah, A. Andri. 2017. Perancangan Sistem Kendali Otomatis Pada Model Stasiun Penebahan Studi Kasus Di PT. Perkebunan Nusantara V – PKS Sei Galuh. Jom FTEKNIK. Vol. 4 No. 1.
4. Aruna Y. V, Beena S. 2015. Automatic Convey or System with in Process Sorting Mechanism using PLC and HMI System. Journal of Engineering Research and Applications. Vol. 5 (11). Pp 37 - 42.