Synthesize and Characterization of Hydroxyapatite from Freshwater Snail Shell Sulcospira Sp. Proceed by Combination of Ball Milling and Heat Treatment
Abstract
Hydroxyapatite is one of important material in orthopedic application because its features like human bone, and it has potential to replace metal and ceramic in implantation. Hydroxyapatite may get from waste which rich calcium like sea shell and snail shell. In this research, the characterization of raw materials of hydroxyapatite from freshwater snailshell (Sulcospira sp.) was investigated. The shell was milled with ball mill in 200 rpm during 15 minute with 4 steps. Between the milling was conducted heat treatment process at temperature 900°C for 4h. The shell powder was then sorted based on its roughness with siever machine. Powder characterization was done with Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX) and X-ray Diffraction (XRD). Result of this study show that the minimum size of powder about 67 µm and percentage of calcium in the powder is increased until 55%.
##Keywords:##
Freshwater Snail Shell (Sulcospira), Calcium, Powder, Ball Mill, Heat Treatment.
Published
Nov 30, 2016
How to Cite
FAJRI, Hidayatul et al.
Synthesize and Characterization of Hydroxyapatite from Freshwater Snail Shell Sulcospira Sp. Proceed by Combination of Ball Milling and Heat Treatment.
Journal of Ocean, Mechanical and Aerospace -science and engineering-, [S.l.], v. 37, n. 1, p. 9 - 14, nov. 2016.
ISSN 2527-6085.
Available at: <https://isomase.org/Journals/index.php/jomase/article/view/398>. Date accessed: 30 apr. 2026.
doi: http://dx.doi.org/10.36842/jomase.v37i1.398.
References
1. Mondal, S., Bardhan, J. Mondal, B. Dey, A.,Mukhopadhyay, S.S., Roy, S.,Guha, R.., and Roy, K. (2012). Synthesis, characterization and in vitro cytotoxicity assessment of hydroxyapatite from different bioresources for tissue engineering application. Bulletin Material Science. 35(4), pp: 683–691.
2. Kuriakose, T.A.,Kalkura, S.N.,Palanichamy, M.,Arivuoli, D.,Dierks, K..,Bocelli, G.,Betzel, C. Synthesis of stoichiometric nano crystalline hydroxyapatite by ethanol-based sol–gel technique at low temperature. Journal of Crystal Growth. Vol263 (1-4), pp: 517-523.
3. Saranya, K.,Kowshik, M.,Ramanan, S.R. (2011). Synthesis of hydroxyapatite nano powders by sol–gel emulsion technique. Bulletin of Material Science. vol34 (7), pp:1749-1753.
4. Kim W., Zhang, Q.,and Saito, F.(2000). Mechanochemical Synthesis of Hydroxyapatite from Ca(OH)2-P2O5 and CaO-Ca(OH)2-P2O5 mixtures. Journal of Material Science. pp:35 5401.
5. Balamurugan A.,Kannan, S., and Rajeswari, S. (2002).Bioactive Sol-Gel Hydroxyapatite Surface For Biomedical Applications-In Vtiro Study. Trends Biomater. Artif. Organs. Vol16 (18), pp: 18-20.
6. Tadic, D and Epple, M.(2003). Mechanically stable implants of synthetic bone mineral by cold isostatic pressing. Biomaterials. Vol 24, pp: 4565-4571.
7. Ziegler, A., Hagedorn, M., Ahearn G. A., Carefood, T. H. (2007). Calcium translocations during the moulting cycle ofthe semiterrestrial isopod Ligiahawaiiensis (Oniscidea, Crustacea). J Comp Physiol B. Vol 177, pp:99–108.
8. Lopes-Lima M., Rocha, A., Gonc ?alves, F., Andrade, J., Machado, J. 2010. Microstructural characterization of inner shell layers in the freshwater bivalve Anodontacygnea. J Shellfish Res. Vol 29, pp: 969–973.
9. Hinzmann, M. F., Domingues, B., Lopes-Lima, M., andMachado, J. (2014).Morphological and Chemical Characterization of Mineral Concretions in the Freshwater Bivalve Anodontacygnea (Unionidae). Journal Of Morphology. Vol 00, pp:1–12.
10. Marxen, J. C. and Becker, W. (2000). Calcium binding constituents of the organic shell matrix from the freshwater snail Biomphalariaglabrata.Comparative. Biochemistry and Physiology Part B. Vol 127, pp: 235-242. 11. Ekren, N., Gunduz, O., Celik, S., etal. (2016). Production of Apatite from Snail Shells for Biomedical Engineering Aplications. Key Engineering Materials. Vol 696, pp: 51-56.
12. Marwoto, R. M. and Isnaningsih, N. R. (2012), The freshwater snail genus Sulcospira Troschel, 1857 from Java, with description of a new species from Tasikmalaya, west Java, Indonesia (Mollusca: Gastropoda: Pachychilidae). The Raffles Bulletin of Zoology, 60(1), pp: 1–10.
13. Fritsch GmbH. (2012). Operating Manual, Translation of the Original, ClassicLinePulverisette. Idar-Oberstein: Manufacturers of Laboratory Instruments Industriestrabe 8.
14. Gunawarman, Affi, J.,Ilhamdi, Gundini, Resti and Ahli, Amalul. (2014). Characterization of Bioceramic Powder from Clamshell (AnadaraAntiquata) Prepared By Mechanical and Heat Treatments for Medical Application. Seminar Nasional Tahunan Teknik Mesin Indonesia XIV, 2015, Banjarmasin.
15. P. Dasgupta, A. Singh, S. Adak and K. M. Purobit, (2004). Synthesis and Characterization of Hydroxyapatite Produced from Eggshell. International Symposium of Research Student of Material Science and Engineering.
2. Kuriakose, T.A.,Kalkura, S.N.,Palanichamy, M.,Arivuoli, D.,Dierks, K..,Bocelli, G.,Betzel, C. Synthesis of stoichiometric nano crystalline hydroxyapatite by ethanol-based sol–gel technique at low temperature. Journal of Crystal Growth. Vol263 (1-4), pp: 517-523.
3. Saranya, K.,Kowshik, M.,Ramanan, S.R. (2011). Synthesis of hydroxyapatite nano powders by sol–gel emulsion technique. Bulletin of Material Science. vol34 (7), pp:1749-1753.
4. Kim W., Zhang, Q.,and Saito, F.(2000). Mechanochemical Synthesis of Hydroxyapatite from Ca(OH)2-P2O5 and CaO-Ca(OH)2-P2O5 mixtures. Journal of Material Science. pp:35 5401.
5. Balamurugan A.,Kannan, S., and Rajeswari, S. (2002).Bioactive Sol-Gel Hydroxyapatite Surface For Biomedical Applications-In Vtiro Study. Trends Biomater. Artif. Organs. Vol16 (18), pp: 18-20.
6. Tadic, D and Epple, M.(2003). Mechanically stable implants of synthetic bone mineral by cold isostatic pressing. Biomaterials. Vol 24, pp: 4565-4571.
7. Ziegler, A., Hagedorn, M., Ahearn G. A., Carefood, T. H. (2007). Calcium translocations during the moulting cycle ofthe semiterrestrial isopod Ligiahawaiiensis (Oniscidea, Crustacea). J Comp Physiol B. Vol 177, pp:99–108.
8. Lopes-Lima M., Rocha, A., Gonc ?alves, F., Andrade, J., Machado, J. 2010. Microstructural characterization of inner shell layers in the freshwater bivalve Anodontacygnea. J Shellfish Res. Vol 29, pp: 969–973.
9. Hinzmann, M. F., Domingues, B., Lopes-Lima, M., andMachado, J. (2014).Morphological and Chemical Characterization of Mineral Concretions in the Freshwater Bivalve Anodontacygnea (Unionidae). Journal Of Morphology. Vol 00, pp:1–12.
10. Marxen, J. C. and Becker, W. (2000). Calcium binding constituents of the organic shell matrix from the freshwater snail Biomphalariaglabrata.Comparative. Biochemistry and Physiology Part B. Vol 127, pp: 235-242. 11. Ekren, N., Gunduz, O., Celik, S., etal. (2016). Production of Apatite from Snail Shells for Biomedical Engineering Aplications. Key Engineering Materials. Vol 696, pp: 51-56.
12. Marwoto, R. M. and Isnaningsih, N. R. (2012), The freshwater snail genus Sulcospira Troschel, 1857 from Java, with description of a new species from Tasikmalaya, west Java, Indonesia (Mollusca: Gastropoda: Pachychilidae). The Raffles Bulletin of Zoology, 60(1), pp: 1–10.
13. Fritsch GmbH. (2012). Operating Manual, Translation of the Original, ClassicLinePulverisette. Idar-Oberstein: Manufacturers of Laboratory Instruments Industriestrabe 8.
14. Gunawarman, Affi, J.,Ilhamdi, Gundini, Resti and Ahli, Amalul. (2014). Characterization of Bioceramic Powder from Clamshell (AnadaraAntiquata) Prepared By Mechanical and Heat Treatments for Medical Application. Seminar Nasional Tahunan Teknik Mesin Indonesia XIV, 2015, Banjarmasin.
15. P. Dasgupta, A. Singh, S. Adak and K. M. Purobit, (2004). Synthesis and Characterization of Hydroxyapatite Produced from Eggshell. International Symposium of Research Student of Material Science and Engineering.
