Design of Pin On Disc Tribometer Test Equipment Using the Hatamura Method
Abstract
To determine the rate of wear and coefficient of friction, a test instrument is used, namely a tribometer with a pin on disc type. Before manufacturing, it is necessary to have a design that must comply with existing standards. This study aims to design a pin on disc tribometer with circular motion and reciprocating linear motion using the Hatamura method and its main components, analyze the shaft and frame and produce working papers in the form of technical drawings and bill of materials in the manufacture of test equipment. Pin-on-disc tribometer. In this study, designing several concepts of the pin on disc Tribometer according to the Hatamura method and then evaluating the existing concepts and selecting concepts based on the decision matrix, then the concepts will be designed and analyzed by manual calculations and validation using Autodesk Inventor to determine stress, deflection, as well as safety factors on the axle and frame. The final result of this research is a technical document in the form of layout drawings and assembly drawings as well as detailed drawings of each component and bill of materials.
References
[2] ASTM G 99 – 04. Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus.
[3] Bhandari, V. (2010). Design of Machine Elements. Tata McGriw Hill, New Delhi.
[4] Hatamura, Y. (2006). Decision in Design, in Decision-Making in Engineering Design, London: Springer-Verlag, 39-49.
[5] Marjanovic, N. (2006). Design of Modern Concept Tribometer with Circular and Reciprocating Movement. Journal of Trybology in Industry, 28, 3-7.
[6] Cupu, D. & Syamza, N. (2021). Design of disc on disc wear test equipment using VDI 2221 method. Journal of Ocean, Mechanical and Aerospace -Science And Engineering-, 65(3), 100-106.
[7] Hatamura, Y. & Yamamoto, Y. (1999). The Practice of Machine Design, Oxford University Press, New York.
[8] Hidayatyullah, T. (2018). The design of the pin on disk type coefficient of friction test equipment using the Pahl and Beitz method. Faculty of Engineering. University of Lampung, Indonesia.
[9] Sadrinaldi & Lazarus, B. (2020). Manufacture of pin-on-disc type tribometer test equipment. Faculty of Engineering, University of Riau, Indonesia.
[10] Budynas. (2011). Shigley's Mechanical Engineering Design (9th ed.). McGraw Hill: New York.
[11] Sularso. (2008). Basic Design of Mechanical Elements, Jakarta : Pradnya Paramita.