Automatic Task Machine (ATM) Design for Logistic Package by Method Analytical Hierarchy Process (AHP) Through Approach the Design for Manufacturing (DFM)

  • Deni Pranata Mechanical Engineering Department, Universitas Riau, Indonesia
  • Dodi Sofyan Arief Mechanical Engineering Department, Universitas Riau, Indonesia
DOI: http://dx.doi.org/10.36842/jomase.v65i1.226

Abstract

The Automatic Task Machine (ATM) machine for logistics packages is a machine vision to measure the dimensions and other components in form load cell, which serves to measure the mass of an object. This machine design was development the addition of components such as insert card, screens, navigation buttons, receipt printers, automatic package doors and a storage room delivery mechanism. Method of Analytical Hierarchy Process (AHP) was chosen to determine the ATM design for the optimal logistics package for the best alternative decision. The questionnaires were made to get priority consumer needs, which it used for the initial design. The consumer needs questionnaire was based on several indicators, namely: ergonomics, measurement of dimensions and weight, package transmission and package storage. The next stage was selecting the optimal design using AHP, which involves Expert based on the indicator of a product. The highest indicator value obtained for the logistics package ATM is "dimension and weight" with a value of 5.22 and the optimal design choice was "alternative 3". The optimal design choice was analyzed using the Design for Manufacturing (DFM) approach to consider the cost of manufacturing product, which aims to minimize the cost of making ATMs for logistics packages.

##Keywords:## Automatic Task Machine (ATM), Dimensions, Mass, Analytical Hierarchy Process (AHP), Design for Manufacturing (DFM).
Published
Mar 29, 2021
How to Cite
PRANATA, Deni; ARIEF, Dodi Sofyan. Automatic Task Machine (ATM) Design for Logistic Package by Method Analytical Hierarchy Process (AHP) Through Approach the Design for Manufacturing (DFM). Journal of Ocean, Mechanical and Aerospace -science and engineering-, [S.l.], v. 65, n. 1, p. 1-7, mar. 2021. ISSN 2527-6085. Available at: <https://isomase.org/Journals/index.php/jomase/article/view/226>. Date accessed: 19 aug. 2024. doi: http://dx.doi.org/10.36842/jomase.v65i1.226.
Citation Formats
Issue
Vol 65 No 1 (2021): Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse)
Section
Articles

References

[1] A. Prayitno, Minarni, Arief, DS, R. Al Ihsan, H. Tarmizan. 2018. Automatic Control System on the Machine Vision Volume and Weight Gauges. Proceeding of Ocean, Mechanical and Aerospace -Science and Engineering-, Vol. 5 No.1, 92-96.
[2] A. Prayitno, Minarni, Arief, DS, M. Mirdanies, D. Ayunita. 2018. Imaging and Programming Based Computation of Logistic Package Volumes Application on Automatic Mail Machines. Journal of Ocean, Mechanical and Aerospace -Science and Engineering-, Vol.62 No.1, 1-4.
[3] Arief, DS, Minarni, A. Prayitno, M. Dalil, A. Rahman, S. Rahmadonal. 2018. Design of Automatic Measuring Machine of Mass and Dimension with the DFMA Method. Proceeding of Ocean, Mechanical and Aerospace -Science and Engineering-, Vol. 5 No.1, 84-91.
[4] Arief, DS, Minarni, A. Prayitno, M. Badri, AS Nugraha, A. Muflihana. 2018. Calibration of 40 Kg Capacity Digital Scale on Automatic Machine Measurement Mass and Dimension Based on Arduino Uno Using CSIRO-NML: 1995 Method. Proceeding of Ocean, Mechanical and Aerospace -Science and Engineering-, Vol. 5 No.1, 97-102.
[5] Ashok, WR, MS Panse, and H. Apte. 2015. Laser Triangulation Based Object Height Measurement. International Journal For Research In Emerging Science And Technology, Volume-2 (3), 61-66.
[6] Boothroyd, Geoffrey. 2005. Assembly Automation and Product design. Second Edition. Wakefield. Boothroyd, Geoffrey. 2010. Product Design for Manufacturing and Assembly, Marcel Dekker, Inc. Dekker, M. 2002. Manufacturing Engineering And Materials Processing. Marcel Dekker Inc. New York.
[7] Cognex. 2016. Introduction to Machine Vision. Company booklet USA www.cognex.com.
[8] Darmawan. 2004. Introduction to Engineering Design (Product Design) Edition II. Bandung; ITB.
[9] Jayaraman, J. (2015). Introduction To Design For Manufacture And Assembly (Dfma)
[10] J.Jayaraman Center For Aerospace Systems Design Engineering Indian Institute Of Technology. Retrieved November 10, 2016, from Slide Player: http://slideplayer.com/slide/6101828/
[11] Mathiassen, J. R, S. Jansson, E.veliyulin, T. Njaa, M. lonseth, M. Bondo, SO Ostvik, J. Risdal, A. Skavaug. 2006. Automatic Weigh and Quality Grading of Whole Pelagic. Nor-Fishing Technology Conference, Trondheim, Norway.
[12] Prawoto, Ihsan. July 2015. Determining ArduinoUNO Microcontroller ATMega328.
[13] Saaty, Thomas L. 1988. Multicriteria Decision Making - The Analytic Hierarchy Process. Typeset in GreT Britain by Eta Service Typesetters Ltd. Beccles Sufflolk Printed and Bound in the United States America.
[14] Saaty, TL 1993. Decision Making for Leaders. Liana Setiono, translator. Translation of: Decision Making for Leaders The Analytical Hierarchy Process for Decision in Complex Word. Jakarta: Pustaka Binaman Presindo.
[15] Saaty, T. & Vargas, L. 2001. Models, Methods, Concepts and Application of the Analytic Hierarchy Process. Dordrecht: Kluwer.` Saaty, T, L. 2008. Decision making with the analytic hierarchy process. Int. J. Services Sciences. Volume 1. No.1: 83-98. Schuler, CA & McName,
[16] Ulrich, Karl. T. And. Eppinger, Steven. D. Product Design and Development. Fith edition. McGraw Hill.2012.