The Effect of Spindle Speed Variation on Results of Drilling Process in Radial Arm Drilling Machine RD-1600

  • Calvin Aidil Febri Mechanical Engineering Departement, Universitas Riau, Indonesia
  • Ujang Nuhadek Mill Workshop, PT. Riau Andalan Pulp and Paper_RAPP, Pelalawan, Riau, Indonesia
DOI: http://dx.doi.org/10.36842/jomase.v63i2.199

Abstract

Radial Arm Drilling is a tool used to perforate an object. Radial Arm Drilling is designed for large work and work where the workpiece does not allow rotating. This machine consists of a vertical pole which supports an arm carrying a drill head. Its arms can rotate around to any position on the workbench, and the drill head has an adjustment along this arm. This radial arm drilling machine has automatic feeding, so in the drilling process, the operator no longer needs to press the spindle to the workpiece. The selection of feeding on the radial arm drilling machine is in accordance with the size of the drill bit used on the material to be drilled. For the selection of spindle, speed rotation has 2 types, namely high (50 hz and 60 hz) and low (50 hz and 60 hz).

##Keywords:## Radial Arm Drilling, Feeding, Spindle Speed
Published
Jun 19, 2020
How to Cite
FEBRI, Calvin Aidil; NUHADEK, Ujang. The Effect of Spindle Speed Variation on Results of Drilling Process in Radial Arm Drilling Machine RD-1600. Journal of Ocean, Mechanical and Aerospace -science and engineering-, [S.l.], v. 63, n. 2, p. 6-10, june 2020. ISSN 2527-6085. Available at: <https://isomase.org/Journals/index.php/jomase/article/view/199>. Date accessed: 19 aug. 2024. doi: http://dx.doi.org/10.36842/jomase.v63i2.199.
Citation Formats
Issue
Vol 63 No 2 (2019): Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse)
Section
Articles

References

1. Daryanto, 2011. Teori Kejuruan Teknik Mesin Perkakas. Jakarta: PT RINEKA CIPTA
2. Santosom Joko 2013. Pekerjaan Mesin Perkakas. Jakarta: Direktorat Jenderal Peningkatan Mutu Pendidikan & Tenaga Kependidikan
3. Rahdiyanta, D., 2010, Buku 4 Proses Gurdi (Drilling), Jurusan Pendidikan Teknik Mesin Fakultas Teknik Universitas Negeri Yogyakarta, Yogyakarta
4. Joko Waluyo, 2010, ”Pengaruh Putaran Spindle Utama Mesin Bor Terhadap Keausan Pahat Bor Dan Parameter Pengeboran Pada Proses Pengeboran Dengan Bahan Baja”, Jurnal Teknologi, Volume 3, Nomor 2, pp. 138-144.
5. Taufiq Rochim (1993) Teori dan Teknologi Proses Permesinan Bandung, Penerbit ITB.